FRP MOTOR PROTECTION GUARD
The necessity to protect the equipment, needs no emphasis. The daily failures due to one reason or the other is reminding us always. A little money extra spent on the protective means, is worthwhile than facing the breakdown and failures. The motors are invariably subjected to abnormal circumstances (other than the designed parameters) such as
Installed directly under sun/rain.
Installed in dusty atmosphere.
Installed in the vicinity of flying objects (e.g. waste paper, clothes, leaves etc.)
Hit by falling object
Excessive heating due to fire or heat in the vicinity.
Splash of oil/acid/ corrosive substances
The motors should be protected from abnormal eventualities and should be guarded to minimize the risk of damages.
To protect the equipment PROTECTION GUARD is suggested, which is a cover made of FRP ( hand lapping process)
Application of FRP motor guard & FRP Canopy
Chemical & Pharmaceutical Plants
Water Treatment Plants
WHY FRP? Because FRP is
Resistant to corrosive environment
No water absorption
Highly insulating material
Excellent weather ability
FEATURES OF MOTOR PROTECTION GUARD
One piece moulded.
LOUVERS are FRP Moulded and provided all around the protection guard (due care has been taken towards the cooling requirement of the motor under full load conditions). The advantage of FRP MOULDED LOUVERS IS THE LIFE, these louvers will last upto the life of the shell ( Unlike the other type of louvers that buckle in a short span under the influence of U .V. RAYS from the sunlight.)
Have appropriate fixing arrangement for the ease of installation at site.
MECHANICALLY STRONG. Extra thickness is given at appropriate places, enabling this to withstand the Stresses and Shocks to which it is normally subjected to at site during its life span.
Lifting handle is provided.